Skip to content
IrriNex logo symbolIrriNex Store
100 ft roll of black quarter-inch drip emitter tubing with IrriNex Store logoClick to zoom1 / 8
Dripline & شريط تنقيط

1/4-Inch Drip Emitter Tubing with 6-Inch Spacing

SKU: IRN-DRIP-025-6

منتج dripline شريط تنقيط لنقل وتوزيع المياه بكفاءة في أنظمة الري الزراعي.

المادة
PE
نطاق المقاسات
1/4 inch nominal; 50 / 100 / 500 ft rolls
الضغط
10–25 PSI
Size

Selected SKU: IRN-DRIP-025-6-50FT

‏19.99 US$

USD · per selected option
Buy now

Items subtotal: ‏19.99 US$ · Shipping calculated at checkout.

About this item

Water closely spaced planters or beds with 1/4-inch drip emitter tubing. Built-in المخارج are 6 inches apart, with 50-, 100- and 500-foot rolls available.

How it fits your setup

The short emitter interval suits a continuous planted strip where a single أنبوب can wet multiple roots. Built-in المخارج simplify installation compared with punching separate نقاطs into blank microtubing.

Choosing and using it

Choose the طول اللفة for your route and use وصلات made for the selected 1/4-inch tubing. Each outlet is rated at 0.52 GPH at 15 PSI, while the line operates within 10–25 PSI; count all active emitters when sizing the supply. Flush the line before sealing the end and check wetting along the full run.

  • Built-in emitters every 6 inches distribute water along the tube, with a nominal output of 0.52 GPH per emitter at 15 PSI.
  • Flexible polyethylene tubing follows planting layouts and is specified to resist common landscaping chemicals and fertilizers.
  • Connect the nominal 1/4-inch dripline to a 1/2-inch irrigation supply using compatible 1/4-inch barbed fittings.
  • Choose from 50, 100 and 500 ft black tubing rolls, all with the same 6-inch emitter spacing.
  • Operate at 10–25 PSI with filtration of at least 150 mesh; the inline emitters use a regulated-flow, self-flushing design.

التطبيقات

  • Container planting
  • Narrow planting beds
  • Closely spaced garden rows
  • Above-ground or under-mulch drip ري

You may also need

View category