
microaspersores
POM Water-Wheel Irrigation Nozzle for 25 or 32 mm Tubes
Fit a water-wheel nozzle to a compatible 25 or 32 mm tube. POM body, 7 mm inner and 10 mm outer inlet dimensions; rated maximum pressure 20 bar.
De6,00 US$
Escolha as opçõesIrrigação agrícola, diretamente para si
Clique para ampliar1 / 2SKU: GXZS180D
Direct a half-circle mist along one side of a bed or greenhouse edge. The 1.6 mm nozzle is rated at 130 L/h, 2 bar and a 3 m radius.
0,23 US$
USD · por opção selecionadaSubtotal dos itens: 0,23 US$ · Frete calculado no momento da saída.
Water toward the crop side of an edge rather than spraying equally all around a head. The half-circle frame and fixed deflector make this a useful pattern to consider for the side of a greenhouse bench or planted row.
Its 1.6 mm nozzle is rated at 130 L/h at 2 bar with a stated 3 m radius. Check that the spray sector faces the plants and that nearby walls or paths stay outside the intended wetting area.
Flush and filter the supply before fitting the nozzle. Observe the real pattern at operating pressure before fixing the final spacing.
| Parâmetro | Valor |
|---|---|
| Diâmetro | 1.6mm |
| Taxa de Vazão | 130L/h |
| Pressão de trabalho | 2Bar |
| Raio de pulverização | 3m |
Reveja as informações de entrega e as opções de envio disponíveis antes de colocar o seu pedido.
Ver as informações de envioLeia o processo de devolução e contacte a nossa equipa se a sua encomenda precisar de atenção.
Ler a política de devoluçõesEnvie o modelo, o tamanho do tubo e a pressão de trabalho para que nossa equipe possa ajudá-lo a escolher.
Suporte ao produto em contacto
microaspersores
Fit a water-wheel nozzle to a compatible 25 or 32 mm tube. POM body, 7 mm inner and 10 mm outer inlet dimensions; rated maximum pressure 20 bar.
De6,00 US$
Escolha as opções
microaspersores
Create a flat spray for targeted strips or a multi-nozzle boom. Choose among 11 tip sizes across a rated 0.33–9.24 L/min range at 2–4 bar.
De0,85 US$
Escolha as opções
