Skip to content
IrriNex logo symbolIrriNex Store
Black 4 mil polyethylene landscape sheeting roll with IrriNex Store logoClick to zoom1 / 14

4 Mil Black Plastic Sheeting for Garden Beds and Weed Control

SKU: IRN-SHEET-4MIL-BLK

Cover prepared beds with opaque 4 mil black polyethylene film. Choose a 3 ft x 50 ft, 3 ft x 100 ft or 4 ft x 100 ft roll and cut it to suit your layout.

Material
PE
Size Range
3 ft × 50 ft; 3 ft × 100 ft; 4 ft × 100 ft
Pressure
Not applicable
Size

Selected SKU: IRN-SHEET-4MIL-BLK-3X50

$14.99

USD · per selected option
Buy now

Items subtotal: $14.99 · Shipping calculated at checkout.

About this item

Use 4 mil black plastic sheeting to cover prepared garden beds, help limit weed growth and protect surfaces during everyday projects. The opaque low-density polyethylene film blocks light beneath the covered area and can be cut to fit planting rows or a temporary protective cover. Choose one roll in the width and length that suit your layout.

Close-up of flexible black polyethylene sheeting folded over itself

A flexible 4 mil covering

The nominal thickness is 4 mil: 0.004 inch, or approximately 0.102 mm. This is a continuous plastic film with a smooth surface. Measure the area to be covered and allow extra material for overlaps, tucked edges and fastening before choosing a roll.

Choose the roll size for your project

  • 3 ft x 50 ft: 150 sq ft of nominal sheet area.
  • 3 ft x 100 ft: 300 sq ft of nominal sheet area.
  • 4 ft x 100 ft: 400 sq ft of nominal sheet area.

These areas are calculated from the uncut dimensions. Usable coverage decreases when you overlap sheets, fold edges or cut planting openings. All three options are black with the same nominal 4 mil thickness; select the size before ordering.

Black plastic sheeting covering a garden bed around planting holes

Keep light away from covered soil

Lay the film over a prepared bed and keep it close to the soil so exposed gaps do not undermine the cover. Leave openings for the plants and inspect those openings for emerging weeds. Plan drip irrigation below the sheet before fastening it, while keeping valves and service connections accessible.

Black plastic sheeting being cut with scissors

Trim around your layout

Unroll the material, mark the required length and cut it with suitable scissors. Make planting holes only where they are needed. Secure the perimeter and any overlaps to suit the ground and exposure; sharp stones, rough edges and loose sections can damage film or let wind lift it.

Water droplets resting on black polyethylene film

Plan for water and drainage

The solid plastic surface acts as a water barrier, so rainfall should not be relied upon to irrigate a fully covered bed. Provide a watering route to the root zone and avoid layouts that leave standing water on top. The droplet photograph illustrates the surface; it does not establish a certified waterproofing or vapor-control rating.

Useful beyond the planting bed

Cut pieces can also serve as temporary covers for tools, stored materials or surfaces during painting and cleanup. Match the covering to the task and keep it clear of heat sources or abrasive edges. Inspect exposed film periodically and replace torn sections. At the end of use, collect loose pieces and dispose of the material through an appropriate local waste route.

What is supplied?

One black 4 mil sheeting roll in the selected size. Plants, soil, scissors, irrigation tubing and securing materials shown in the images illustrate use and are supplied separately.

  • Black low-density polyethylene film
  • Nominal 4 mil thickness, approximately 0.102 mm
  • Three roll sizes: 3 x 50, 3 x 100 and 4 x 100 ft
  • Opaque cover helps limit light reaching weeds
  • Cuts to fit beds and temporary protective covers

Applications

  • Garden weed suppression
  • Landscape bed coverage
  • Temporary water or vapor barrier
  • Painting and dust containment
  • Equipment and material protection