Adjustable Dripper 0–70 L/h for Individual Plants

An adjustable dripper lets you change the water delivered beside an individual plant by turning its red cap. The listed adjustment range is 0–70 L/h; actual output depends on the supply pressure and the chosen cap setting.

Set the watering point for the plant

Start at a low setting and observe the soil while the complete irrigation zone is running. Increase output as needed to wet the intended root area. The pictured patterns illustrate adjustment rather than promise a measured radius or identical output at every setting.

Fit the inlet

The listed connection is a 4 mm barb. Match the micro tubing or lateral installation method to the inlet and check a completed connection before laying out many outlets. Position the dripper so water reaches the plant rather than a walkway or unused area.

Access the flow passage for cleaning

The removable cap exposes the internal passage for inspection. Turn off and depressurize the line before taking the dripper apart. Remove debris carefully, flush the line and refit the cap before checking the output again.

Check the complete watering zone

Adjust outlets with the full zone operating, because adding or changing emitters can affect available flow. Use filtered water and inspect delivery periodically. This adjustable outlet should not be treated as a fixed-flow pressure-compensating emitter.

Select the pack quantity

Choose the listed 50, 100, 500 or 1000 pack to suit your layout. Pack quantity is separate from each dripper’s flow setting. Compare online drippers when a different outlet type is required.