PE Pipe Compression Female Thread Adaptor

PE Pipe Compression Female Thread Adaptor

This PE pipe compression female thread adaptor provides a straight transition from plain polyethylene pipe to a male threaded component. The blue compression nut sits at the pipe end, while the opposite black socket carries an internal thread. Use it where a supply pipe reaches a threaded valve inlet, filter connection or other compatible irrigation fitting. Its inline layout keeps the pipe and equipment connection on the same axis, making it useful when there is no need to turn or branch the water path.

Select the pipe and thread combination

The size option identifies two different connection measurements: the metric figure is the pipe outside diameter, and the inch figure is the nominal threaded connection. Match both measurements before ordering; an inch thread size is not a measurement of the pipe outside diameter. Available combinations are 20 × 1/2", 20 × 3/4", 25 × 1/2", 25 × 3/4", 25 × 1", 32 × 1/2", 32 × 3/4", 32 × 1", 40 × 1", 40 × 1 1/4", 40 × 1 1/2", 50 × 1 1/2", 50 × 2", 63 × 2", 75 × 2 1/2", 90 × 3", 110 × 4". These combinations allow the threaded connection to be chosen independently of the pipe diameter where a listed option is available.

Plan an accessible irrigation connection

Measure the existing pipe and check that its material and wall construction suit a compression joint. Confirm the mating male connection has the same thread size and standard before assembly. The thread standard is not confirmed by the size label alone. Prepare a clean, square pipe end and keep grit away from the sealing surfaces. Follow the fitting installation instructions for pipe insertion and nut tightening, and use a thread sealing method suitable for the mating components.

Check the completed assembly

Provide support for adjacent valves or equipment so their weight does not strain the adaptor. Position the connection where the compression nut can be reached for inspection. Fill the line gradually, inspect both the pipe and threaded joints for leakage, and confirm the operating pressure is within the limits of every connected component. For a replacement, compare the original connection arrangement as well as the dimensions so the new fitting preserves the intended flow route.