90 Degree Compression Elbow for PE Irrigation Pipe

SKU: 706020

Turn a PE irrigation supply line through 90 degrees with a blue-nut compression elbow. Match both sockets to the outside diameter of your pipe.

Size Range: 20 × 20 mm / 25 × 25 mm / 32 × 32 mm / 40 × 40 mm / 50 × 50 mm / 63 × 63 mm / 75 × 75 mm / 90 × 90 mm / …

Option

H-Compression Fitting

Selected SKU: 706020

$1.42

USD · per selected option

Quantity

Items subtotal: $1.42 · Shipping calculated at checkout.

Delivery information PayPal checkout Product support

About this item

A 90 degree compression elbow changes the direction of a polyethylene irrigation line at a corner. Its angled black body and two blue nuts provide a defined right-angle connection instead of forcing a tight bend into the pipe. Use it where a supply route turns around a bed, follows a boundary or approaches another irrigation component.

Lay out the corner before cutting

Position the elbow so both pipe ends approach their sockets straight. Leave room around the nuts for assembly and future inspection. Support the pipe on each side of the corner so the fitting does not carry the weight or tension of the adjoining run. Check that the completed route clears nearby structures.

Match the pipe before assembly

Compression fitting sizes refer to the pipe connection diameter. Check the actual outside diameter, pipe material and wall specification rather than relying on an inside-diameter measurement. The selected option must match every connected pipe. Confirm the permitted pressure and temperature for your complete system before installation; the weakest component determines the usable operating limit.

Prepare and test the connection

Turn off the water and release pressure before working on the line. Cut the pipe square, remove loose debris and check the end for scratches or distortion. Follow the fitting assembly instructions for insertion depth, any required pipe support and tightening. Keep the sealing surfaces clean and avoid forcing a misaligned pipe into the socket. Bring the zone up to pressure gradually, inspect every connection and resolve any leakage before covering the pipe.

Choose the right fitting shape

Check the route and number of outlets as well as the size. Leave the joint accessible during the initial test and provide space for later inspection. A correctly selected fitting should suit the planned layout without twisting the pipe or putting unnecessary strain on the connection.

Right-angle body changes pipe direction
Two matching compression sockets
Blue compression nuts with a black fitting body
Select connections by pipe outside diameter

Applications

Agricultural irrigation

Available options and dimensions

Compare sizes, connections and specifications to choose the right option for your system.

Scroll sideways to compare all specifications.

Option / Size	SKU	Specifications
20 × 20 mm	706020	Connection size 20 × 20 mm
25 × 25 mm	706025	Connection size 25 × 25 mm
32 × 32 mm	706032	Connection size 32 × 32 mm
40 × 40 mm	706040	Connection size 40 × 40 mm
50 × 50 mm	706050	Connection size 50 × 50 mm
63 × 63 mm	706063	Connection size 63 × 63 mm
75 × 75 mm	706075	Connection size 75 × 75 mm
90 × 90 mm	706090	Connection size 90 × 90 mm
110 × 110 mm	706110	Connection size 110 × 110 mm