High-Suction Solar Surface Pump for Field Irrigation

Lift water to an irrigation supply with a brushless DC surface pump, up to 8 m maximum suction and three distinct flow and head choices.

Water transfer in your irrigation setup

The yellow pump housing sits on a black carrying base with a raised top outlet and controller above the motor. This high-suction surface arrangement suits installations that draw water through an inlet pipe while the pump stays accessible above the source. Its 8 m maximum suction figure is a limit rather than a promise under every site condition.

Choose the output for your installation

Choose among 6.5 m³/h maximum flow with 35 m maximum head, 20 m³/h with 22 m, or 40 m³/h with 12 m. Outlet sizes are 1, 2 and 3 inches respectively. The first choice uses 750 W and the others 900 W; all list a 72–150 V input range. Each pair gives separate maximum ratings, not a simultaneous operating point.

Prepare the source and delivery route

Support the pump on a stable surface and support the water lines independently. Keep the intake airtight and prime the pump as required before starting. Check delivery flow at the actual total head, including pipe losses and the pressure needed by the irrigation equipment. Confirm the solar panels, controller and accessories supplied with your chosen configuration.

The maximum liquid temperature is 35°C. Plan an accessible location for checking connections and keeping the intake clear during use.

Flow and head performance

Read the curve at your required flow and total head. Maximum flow and maximum head are separate limits, not one operating point.

Open full-size performance chart