12V or 24V Low-Flow DC Vortex Pump for Garden Water

This low-flow DC vortex pump supplies a small irrigation point, garden water line or clean-water transfer duty. It uses a DC brush motor and a copper impeller. Choose the voltage option to match the power supply and calculate the water duty before connecting it to an existing line.

Choose 12V or 24V

The 12V option lists 180 W power, 1.5 m³/h maximum flow and 15 m maximum head. The 24V option lists 230 W power, the same 1.5 m³/h maximum flow and 25 m maximum head. Both list 1-inch inlet and outlet connections. Maximum flow and maximum head are separate limits; confirm the flow available at the operating head for the selected option.

Match the supply and the water line

Use the specified DC voltage and confirm current demand, cable length and protection for the installation. Do not assume that a pump can be connected directly to an unregulated solar panel. Add elevation, pipe friction and outlet pressure requirements when calculating total head. Follow the priming procedure and avoid operating the pump without water.

Use within the listed water limits

The pump is listed for clean water with a maximum sand content of 150 g/m³ and a maximum liquid temperature of 35°C. Keep the inlet screened as appropriate for the source and inspect the suction connection for air leaks. The surface-pump layout requires a suitable mounting position outside the water; confirm the allowable suction lift for the installation.

Check the chosen option and accessories

Select the voltage and head option before requesting supply. Confirm fittings, power equipment and other accessories included with one pump. The 12V option requires a configuration quotation; the listed price for the 24V option applies to that selected electrical and hydraulic configuration.

Flow and head performance

Read the curve at your required flow and total head. Maximum flow and maximum head are separate limits, not one operating point.

Open full-size performance chart