Solar Centrifugal Pump with Protective Carrying Frame

Choose a brushless solar surface pump inside a protective carrying frame, with connection sizes from 1 to 4 inches for different irrigation duties.

Water transfer in your irrigation setup

The green carrying frame wraps around the pump assembly, with side rails standing above the motor and wet end. It gives this pump a practical form for installations where the equipment must be carried into position and supported beside the water source. The frame keeps the assembly together while leaving the front water connection accessible.

Choose the output for your installation

Seven choices span small 1-inch connections through 4-inch water-transfer connections. Their maximum flow and head ratings vary independently: a larger flow option does not automatically provide more delivery height. Compare the exact connection, power and working voltage of your chosen option before planning the pipework or solar supply.

Prepare the source and delivery route

Support the pump on a stable surface and support the water lines independently. Keep the intake airtight and prime the pump as required before starting. Check delivery flow at the actual total head, including pipe losses and the pressure needed by the irrigation equipment. Confirm the solar panels, controller and accessories supplied with your chosen configuration.

The maximum liquid temperature is 35°C. Plan an accessible location for checking connections and keeping the intake clear during use.

Flow and head performance

Read the curve at your required flow and total head. Maximum flow and maximum head are separate limits, not one operating point.

Open full-size performance chart