Solar Centrifugal Surface Pump with Carrying Base

Transfer irrigation water with a brushless solar centrifugal pump, copper impeller and carrying base. Choose the output for your pipe route.

Water transfer for your installation

The red centrifugal housing, black finned motor and arched handle sit together on a tubular base. This above-ground arrangement keeps connections accessible when transferring water toward storage or an irrigation inlet. Iron construction and a copper impeller distinguish it from the yellow self-priming transfer pumps.

Choose the connection and operating duty

Seven choices range from 300 to 1100 W with 1-, 1.5- or 2-inch outlets. The 300 W choice lists separate maximum ratings of 3.5 m³/h flow and 18 m head. Match the selected input range to the solar supply; nominal voltage alone does not describe permitted input.

Prepare the water and power connections

Prime the centrifugal pump before starting. Keep the suction connection airtight and support the pipework independently.

Size the pump from flow at the actual total head, including elevation, pipe friction and irrigation pressure. Maximum flow and maximum head are separate limits, not a simultaneous operating point. The maximum water temperature is 35°C.

Flow and head performance

Read the curve at your required flow and total head. Maximum flow and maximum head are separate limits, not one operating point.

Open full-size performance chart