1/2-Inch Threaded Adjustable Mist Sprinkler for Garden Irrigation

Water a garden bed, greenhouse row or nursery planting area from a compact threaded head. This adjustable mist sprinkler combines a black body, blue band and brass top with a 1/2-inch male connection. It suits a compatible female-thread riser or fitting where you want a fine, full-circle spray without a large impact sprinkler.

See the adjustment and connection

Choose the fitting before you install

The close view shows the brass adjustment top above the blue band and the male threaded base below. Check the thread type on your existing riser or adapter before ordering; a nominal 1/2-inch size alone does not establish the thread standard. Turn the top gradually while the zone is running to set the spray you need.

Plan the zone around the rated flow

The listed operating range is 1.5–3 bar and 140–280 L/h, with a stated spray radius of 2.5–3 m. Allow for all heads running at once when sizing the supply line. Actual wetting depends on pressure, adjustment, mounting height and wind, so test spacing with water on before fixing every riser in place.

Check the spray and the joint

The installation views show the threaded inlet and an example spray over plants. Flush the line before fitting the head, mount it upright and inspect the joint at normal operating pressure. If the pattern becomes uneven, shut off the water and clear debris from the nozzle and upstream filter.

Sold as one sprinkler head. Riser, adapters and irrigation pipe are separate.