Split-Body Layflat Hose Connector for 16 mm Drip Line

A split-body layflat hose connector starts a 16 mm drip lateral from a compatible hose takeoff. The hose-facing end and the line end use different retaining arrangements. This fitting provides a transition from the layflat header to an individual drip run without requiring the line to connect directly to the hose wall.

Separate header attachment and line retention

The view shows the broad hose-facing inlet, black winged retaining sections and the blue locking nut at the line end. The split-body arrangement belongs at the header connection; the blue nut secures the lateral on its insert. Identify these parts before fitting and leave them accessible for inspection.

Connection details

• Drip line connection: 16 mm.
• Header application: compatible layflat hose takeoff.
• Body arrangement: split-body connector.
• Line retention: blue locking nut.

Choose and position the fitting

Confirm that the layflat hose construction and takeoff arrangement suit this connector before making an opening. Use the opening size and sealing arrangement specified for the actual fitting and hose combination. Do not transfer the hole diameter from another layflat connector, since different inlet shapes and retaining bodies can require different openings.

Fit and inspect the joints

Turn off the header supply and release pressure. Prepare the takeoff to the appropriate fitting specification, assemble the split body with its required seal and avoid damaging the hose wall. Seat the 16 mm lateral fully on its insert and secure the blue nut without folding or twisting the line. Support the lateral so it does not pull sideways on the header. Restore water gradually and inspect both the hose attachment and lateral joint.

Sold as one fitting. Line, mating components and installation accessories are separate.