16 mm Locking Takeoff Tee Valve for Drip Irrigation

This 16 mm locking takeoff tee valve combines a three-way connection with manual irrigation control. Two blue collars sit on opposite sides of the black tee body, and a short takeoff projects below it. The red wing handle provides an accessible operating point above the junction. Use it where a takeoff needs to connect with two opposing lateral connections in a compact row layout.

See the three connection points

The straight pair of locking connections and the lower takeoff serve different parts of the junction. The listed nominal connection size is 16 mm. Check the exact tubing or tape dimensions for the collar connections and confirm the takeoff seat and sealing components separately. A three-way shape alone does not establish which outlets are isolated at every handle position; confirm the supplied valve operation when commissioning the layout.

Plan an accessible junction

Leave room to turn the wing handle and reach both collars without pulling the lateral lines. Support the takeoff connection so pipe movement does not twist the tee. This valve provides manual water-path control; it does not automatically maintain downstream pressure or determine the watering duration. Use the system pressure equipment and irrigation schedule to manage those requirements.

Install and inspect all three joints

Turn off the supply before fitting and clean the receiving connections. Seat each compatible line fully, tighten the locking collars by hand and fit the takeoff with its intended seal arrangement. Avoid choosing a drilling diameter from the nominal connection size. Flush debris, restore water gradually and inspect all three joints. Operate the handle while observing the connected lines to establish the correct watering and shutoff positions for your installation.