16 mm Drip Tape End Cap with Lock Ring and Pull Loop

Finish a drip tape row with a secure, serviceable end. This 16 mm drip tape end cap combines a black insert, a blue lock ring and a pull loop so the row end remains accessible after installation. It is useful in garden beds, greenhouses and longer field rows where you may need to open the end to flush sediment before closing the line again.

Secure the tape without glue

Loosen the blue collar, push the open end of compatible drip tape fully onto the fitting stem, then tighten the collar over the tape. The lock ring helps hold the tape at the end connection. Use the pull loop to locate and handle the cap when inspecting the row; the loop is not a substitute for supporting the irrigation line.

Choose the correct end fitting

• Made for the listed 16 mm drip tape connection. Check the tape's actual width and wall profile before ordering.
• Use one end cap per row end. It is sold as a single fitting, without tape or tools.
• Do not assume that 16 mm solid polyethylene tubing uses the same end connection as flat drip tape.

Install and check

Flush the tape before you cap it, leave enough accessible length at the row end to service the fitting, and inspect the connection under normal system pressure. If the tape shifts or leaks, reseat the tape and retighten the collar before continuing irrigation.