Blue-Handle Male Thread to 16 mm Drip Tape Valve

This blue-handle drip tape valve joins a threaded supply outlet to a 16 mm tape row and puts manual flow control at the connection. One end has a male thread; the other has an insert and blue locking collar for the tape. The broad wing handle gives you an accessible control point at the start of a vegetable bed, greenhouse row or field lateral.

Choose both connection sizes

The available combinations are 16 mm tape by 1/2-inch male thread and 16 mm tape by 3/4-inch male thread. Choose the thread to match the receiving female outlet, then check the tape dimensions and wall profile against the locking connection. Nominal thread diameter alone does not establish thread compatibility: confirm the receiving thread standard before fitting.

Keep row control within reach

Place the valve where you can reach the handle and collar without pulling on the tape. It lets you stop the supply to that row while arranging tape, inspecting a connection or changing the planting layout. Manual handle adjustment changes the opening; it does not provide automatic pressure regulation or a measured flow setting.

Fit and inspect

With the supply off, connect the threaded end using a sealing method suitable for the receiving fitting. Avoid forcing the threads or using the tape collar as a wrench. Loosen the collar, seat compatible tape fully on the insert and tighten the collar by hand. Restore the supply gradually, inspect both joints and check the row for an even water supply. Support the supply fitting so the valve and tape do not carry pipe strain.