Lock Ring Takeoff Valve, 25–32 mm

This takeoff valve combines a branch connection with a manual wing handle above the flow path. A locking ring secures the receiving hose, while a retaining connection sits at the takeoff end. It keeps the branch shutoff close to the supply.

Choose the connection

Choose 25, 28 or 32 mm to match the receiving hose. Confirm the hose diameter convention and wall thickness, then check the supply opening and seal separately. The branch size does not specify the hole required in the mainline.

Plan and fit the branch

Position the handle where it stays visible after installation. Route the branch without a kink beside the locking ring and support the supply connection. Do not use the valve to pull the hose into place.

Flush and inspect

With the water off, seat the compatible hose fully and tighten the retaining parts by hand. Flush the supply, restore water slowly and inspect both joints. Check the branch response as you operate the handle and recheck the connection after moving the hose.