Lock Ring Cross Valve, 50 or 63 × 28 mm

A straight main passage and two opposing side outlets form this cross-shaped irrigation junction. Each side outlet has its own manual handle. The layout brings two branch controls together at one point on the main supply route.

Choose the connection

The listed combinations are 50 × 28 mm and 63 × 28 mm. Match the main passage to the supply line and confirm the 28 mm branch connection against the receiving hose. Check the diameter convention and wall thickness before fitting.

Plan and fit the branch

Keep both handles reachable and route each branch without a sharp bend beside the outlet. Support the junction so hose movement does not twist the main passage when a handle is turned.

Flush and inspect

Shut off the supply, seat compatible hoses fully and secure the locking rings by hand. Flush the supply and restore water gradually. Inspect all four joints, then check each branch while operating its handle. Use filtration and pressure control appropriate to the connected system.