16 mm Start Takeoff Valve with Blue Handle

Bring manual control to the beginning of a drip tape row with this 16 mm start takeoff valve. The insert-style inlet connects at a compatible irrigation supply takeoff, while the blue locking collar holds the tape on the outlet. The handle lets you start or stop that lateral at its entry point.

A controlled start for each tape row

Use a valve at the row entrance when beds need different watering times or when one lateral needs attention. Closing the row valve stops incoming water to that branch, making tape inspection and replacement easier to organize. Other branches remain connected to the header; their actual flow still depends on the supply pressure and system layout.

Choose by both connection ends

• Listed size: 16 mm.
• Inlet: insert-style start takeoff; match the receiving connection and seal to its geometry.
• Outlet: drip tape connection with a blue locking collar.
• Control: manual blue handle at the row entrance.

Nominal size alone does not establish a complete fit. Check tape diameter and wall thickness as well as the header connection. If the supply installation uses a grommet, select its opening and seating dimensions to match the actual inlet. Confirm the required hole size before making an opening in the header.

Install without stressing the tape

1. Turn off the supply and release pressure before working on the joint.
2. Clean the receiving connection and seat the insert end securely using the matching seal where required.
3. Cut the tape end square, seat it fully on the outlet and secure the collar without twisting the tape.
4. Keep the lateral aligned with the row and support the supply line so its weight does not pull on the valve.
5. Restore water gradually and inspect both ends for leakage.

Day-to-day use

Use the handle for local on/off control. Maintain filtration and appropriate pressure control upstream for the tape system. Before disconnecting a lateral, shut off and depressurize the supply; water trapped downstream can remain after the row valve is closed. Supply pipe, tape, hole tools and mating seals are separate unless explicitly included in the selected option.