Male Thread Hose Adaptor for Irrigation Connections

This male thread hose adaptor provides a straight transition from an irrigation hose to a compatible female threaded connection. The hose end has raised retaining rings, while the opposite end carries an external thread. A central hexagonal section separates the two connection areas and gives the fitting a clear, accessible body when arranging a water supply line.

Choose both connection sizes

Read the complete option before ordering. The first number identifies the listed hose connection size, and the inch measurement identifies the male thread size. Available combinations run from 32 mm with a 1 inch thread to 110 mm with a 4 inch thread. Several options share a hose size but use different threaded ends, so selecting by hose diameter alone can leave you with an incompatible connection.

Check the mating equipment

Use the adaptor where a flexible irrigation hose needs to meet a valve, manifold or other component with a suitable female connection. Confirm the thread standard as well as its nominal size before assembly. Similar looking threads should not be forced together. Check the hose manufacturer's connection guidance and select a suitable securing method for the hose material and operating conditions.

Assembly and routine checks

Start with a clean, square hose end and inspect both connection surfaces for damage. Seat the hose evenly over the retaining rings, supporting the line so its weight does not pull sideways on the adaptor. Use a sealing method compatible with the mating thread and avoid excessive tightening. Restore water gradually and inspect the threaded joint and hose connection for seepage or movement.

Each selected option is one adaptor. Plan mating fittings, hose and any required clamps separately. Keep the connection accessible for inspection during seasonal setup, line changes and routine irrigation maintenance.