Branch Hose Tee with Mixed Sizes for Irrigation Lines

SKU: 79206332

Add a branch to an irrigation hose run with a three-port barbed tee. Compare the two inline sizes and the middle branch measurement for the selected option.

Size Range: 63 × 32 × 63 mm / 63 × 50 × 63 mm / 63 × 75 × 63 mm / 75 × 63 × 75 mm / 75 × 90 × 75 mm / 90 × 63 × 90 mm / 90 × 75 × 90 mm / 110 × 90 × 110 mm

Option

Irrigation Hose Fitting

Selected SKU: 79206332

$0.63

USD · per selected option

Quantity

Items subtotal: $0.63 · Shipping calculated at checkout.

Delivery information PayPal checkout Product support

About this item

This branch hose tee connects an irrigation run to a side line through a three-port fitting. Two hose tails sit opposite each other to continue the inline run, and a third tail projects from the centre for the branch. The black body has raised retaining rings at each connection, making the hose engagement areas easy to identify when preparing the layout.

Read all three measurements

The selected option lists three connection sizes. The first and last measurements describe the two inline ends, while the middle measurement describes the branch. For example, 63 x 32 x 63 mm pairs two 63 mm inline connections with a 32 mm branch. Read the complete label each time: some available combinations use a branch larger than the inline ends, so the product name alone should not determine your choice.

Match the branch to your layout

Use the tee where a hose supply needs an additional connection to another irrigation run. Check every hose against its intended port before cutting the mainline. Confirm the hose bore, material and suitability for insert fittings, then allow enough space for the branch to leave the line without a sharp bend. Support the hoses so the side run does not twist the tee or pull it out of alignment.

Install and inspect each connection

Prepare clean, square hose ends and remove debris from the line. Seat each compatible hose evenly on the matching tail, using the hose manufacturer's installation guidance. Select suitable clamps where the hose construction and operating conditions require them. Keep all three joints accessible while the supply is restored gradually.

Inspect for leaks and hose movement during the first watering cycle, then check again as part of routine maintenance. Plan the branch's water demand alongside the existing run. Each selected option is one tee; connecting hose, valves and any securing hardware are separate components.

Three hose connection ports
Opposed inline ends with a centre branch
Raised retaining rings at each tail
Full three-size option labels
Selected single tee; connecting components separate

Applications

Agricultural irrigation

Technical Specifications

Parameter	Value
Available connection sizes	63 × 32 × 63 mm / 63 × 50 × 63 mm / 63 × 75 × 63 mm / 75 × 63 × 75 mm / 75 × 90 × 75 mm / 90 × 63 × 90 mm / 90 × 75 × 90 mm / 110 × 90 × 110 mm

Available options and dimensions

Compare sizes, connections and specifications to choose the right option for your system.

Scroll sideways to compare all specifications.

Option / Size	SKU	Specifications
63 × 32 × 63 mm	79206332	Connection size 63 × 32 × 63 mm
63 × 50 × 63 mm	79206350	Connection size 63 × 50 × 63 mm
63 × 75 × 63 mm	79206375	Connection size 63 × 75 × 63 mm
75 × 63 × 75 mm	79207563	Connection size 75 × 63 × 75 mm
75 × 90 × 75 mm	79207590	Connection size 75 × 90 × 75 mm
90 × 63 × 90 mm	79209063	Connection size 90 × 63 × 90 mm
90 × 75 × 90 mm	79209075	Connection size 90 × 75 × 90 mm
110 × 90 × 110 mm	792011090	Connection size 110 × 90 × 110 mm